Search
   
   
 
   
   

TLS® Surgical Drain Evacuation Tube - Replacement Instructions

Step 1.
When evacuation tube is three-quarters full, slide clamp to closed position over drainage tubing.

Step 2.
Grip clear housing and white hub; remove evacuation tube and hub assembly from housing.

Step 3.
Grip cap of evacuated tube thru slots; then grip white hub and pull gently to remove. Be careful of needle.

Step 4.
Place new evacuation tube on white hub; push to puncture needle through center of tube stopper.

Step 5.
Replace hub and tube assembly into housing. Secure assembly near drainage location.

Step 6.
Slide Clamp to open position to reinstitute drainage suction.

WARNING: All used evacuation tubes should be appropriately disposed of by your health care provider.

Doctors and hospitals may order additional evacuation tubes from Porex Surgical Inc. Order the QUINTUBE® Monitor Pack, Catalog #6630.

       
 
|
15 Dart Road | Newnan, GA 30265-1017 USA | Telephone: 1-678-479-1610
Copyright 2004 Porex Corporation. All rights reserved. Legal.